It is very important to always plug IP cameras in one at a time to avoid IP conflicts. If you would like to change this network range, look for a section labeled “Switch” in the Networking area of the menu. The default gateway address for most Network Video Recorders’ Switch is 10.1.1.1, and many units allow this number to be changed. The built in POE switch acts as a router and creates a network that is separate from the network that the Network Video Recorder will join. You would need to plug your computer into the POE switch along with the camera so your computer can receive an IP address from the built in POE switch. If you do not have an external Power Over Ethernet (POE) switch or a separate power supply, you can use the built in Power Over Ethernet switch of your Network Video Recorder to supply power and create the network. You can use a built in Power Over Ethernet (POE) Switch (providing your NVR has one), an external power supply, or an external Power Over Ethernet (POE) Switch. This article will explain the proper technique in networking IP Cameras. There are many ways to accomplish this feat, but the first piece of information needed is how the cameras will receive power. In order to add an IP camera to the network, your cameras need to be on that same network.
0 kommentar(er)
